Stove Pipe Company

Stove Pipe Company, Unit 4 The Power Hub, St. Peters Street, Maidstone, Kent ME16 0ST

Catalogue

FOR THE VERY BEST
IN STOVE PIPE

Tel: 01622 672853
Email: naturalfires@hotmail.co.uk

 

How to fit your stove pipe

Fitting from the top outlet

Using a 45 degree bend

Fitting from rear outlet

Using a 90 degree bend or Tee Piece

Using an increaser

Using a flue damper

Using adjusting stove piping

Cutting your stove pipe

Fixing flue liner connector to stove pipe

Using stove pipe wall supports

 

Delivery >

Contact Us >

Morso >

Nibe >

Institute of
Chimney Sweeps >


Natural Fires >

Chimney Fittings





The stove pipe company has been in the business of supplying stove piping and chimney
flues for over 20 years
we produce the highest quilty of stove piping and flue liner to attach to all makes of wood burning and multi fuel stoves, we also produce all attachments from stove pipe to chimney systems
wood burning and mulit fuel stoves can be piped from the top using single skin strait or 45 degree piping or the rear of the stove using a 90 degree or T peace .The stove piping can then be connected to four main chimney systems listed below

Brick or masonry chimney

A wood burning or multi fuel stove can be connected from the stove using single skin enameled stove pipe into a brick or masonry chimney and closed off with a register plate with sweeping hatch with no additional flue lining nessaserry if the chimney is in sound condition and is not leaking smoke

Ceramic prefabricated chimney lining

prefabricated chimney flues are ether round or squire blocks built with in a brick chimney
A wood burning or multi fuel stove should be connected using single skin enamel stove pipe and a sump pug adaptor

Flexible multi flue liner

    Flexible multi flue liner is designed for relining brick chimneys .The flue liner is drawn down or up the chimney by a nose cone with rope attach to the flue liner.The flue liner is then attached to the stove by single skin enamel stove pipe by a stove pipe to flue liner connector a register plate is also required ,vermiculite insulation is a optional extra.Hanging the flue liner can be proformed to two ways.

  1. 1 Remove chimney pot and place the top plate over flue liner and attach clamp then insert top insert into top of flue liner, bed chimney pot over top plat and clamp and attach bird guard rain cap See liner package A

  2. place flue liner through chimney pot and attach pot hanging cowl to chimney liner and chimney pot See liner package B

Twin wall insulated flue liner

Twin wall insulated flue liner is required when no chimney is in existents .This system can be erected to pass through the house or can be erected on the outside of the property.

Stove Pipe Company
Unit 4, The Power Hub
St. Peters Street
Maidstone
Kent ME16 0ST

Tel: 01622 672853


Email: naturalfires@hotmail.co.uk



© Stove Pipe Company 2009 [All Rights Reserved] Legal

[Home] [Catalogue] [How To] [Contact Us] [Discount Stoves]