Stove Pipe Company, Unit 4 The Power Hub, St. Peters Street, Maidstone, Kent ME16 0ST

How to fit your stove pipe

Fitting from the top outlet

Using a 45 degree bend

Fitting from rear outlet

Using a 90 degree bend or Tee Piece

Using an increaser

Using a flue damper

Using adjusting stove piping

Cutting your stove pipe

Fixing flue liner connector to stove pipe

Using stove pipe wall supports

Register Plates

Made to Measure Register Plates
Quality besoke resgister plates, manufactured by our fabrication department.

Our register plates or closing plates are made to measure to your individual chimney measurements. The register plates are made of 1.5mm steel and are folded for strength, all register plates need to be folded for this reason.

Our register plates can also be made with a sweeping hatch which will depend on your fitting requirments, fitting kits will be provided.

A. Length of left hand side of plate

B. Length of back of plate

C. Length of right hand side of plate

D. Length of front of plate

E. Distance from LHS of plate to centre of the flue

F. Distance from back of plate to centre of the flue

G. Diameter of the flue pipe

 

Stove Pipe Company
Unit 4, The Power Hub
St. Peters Street
Maidstone
Kent ME16 0ST

Tel: 01622 672853


Email: naturalfires@hotmail.co.uk


© Stove Pipe Company 2009 [All Rights Reserved] Legal